1:20 Scale FiguresSculpted and Made In The U.S.A.Follow me on FaceBook Scalehumans | ||||||||||||||||||||||||||||||||||
| More G Scale Figures >> 1 > 2 > 3 | ||||||||||||||||||||||||||||||||||
Items 1 to 12 of 35
Update 5 digit Zipcode Search: |
MzM No Accessories Anywhere This is the same kit as MzM but without the hat and the purse. Note that the assembly instructions are the same for both kits so click on MzM`s picture with the accessories for assembly instruction.
|
MzM Kit Anywhere This is an 11 part kit. There is 1 hat, 1 purse, 1 head, 1 torso, 1 skirt, 2 arms, 2 hands, 2 legs. This kit requires a lot of assembly, but the results are very nice. Please click on the image above and print out the assembly instructions if you intend to purchase this figure.
|
Clyde Anywhere This is a 7 part kit consisting of 1 hat, 1 head with torso, 1 pair of hands molded together, 2 arms, 2 legs and feet. Much assembly is required so please click on the image above and review the assembly instruction prior to assembly. If you are ordering this figure please print this page out because the instructions are not included.
|
|||||||||||||||||||||||||||||||
|
The Brit Anywhere This is a 4 part kit consisting of 2 hats, the main body and a hand with the cane attached. Very little assembly is required. The hats are not optional and without them the figure has a big sprew on its head. Click on the image to see instructions for assembly.
|
Pippin Shoveling ET&WNC This is a five part kit. The top of the hat, the arms, torso and bottom are all separate castings. Click on the thumbnail image for assembly instructions. While the pose is for shoveling, the hands are close enough together to be holding a grease gun or an oil can.
|
Pippin Sitting ET&WNC This is a 5 part kit. The legs, torso and arms are separate castings. Please click on the thumbnail image above to view the steps for assembly. The figure will sit comfortably on a 3/4 inch seat. He leans slightly to his left as if trying to look out a window. The left arm could very easily be adjusted to lean on a window sill.
|
||||||||||||||||||||||||||||||||
|
Cy Standing ET&WNC This is a two part kit. The hat and body are separate casts. This is my final sculpt of the famous ET&WNC conductor Cy Crumley. The pose was inspired from a pose he stood in as a young conductor.
|
Albert Sitting Anywhere This is a finely cast 4 part kit. Please click on the thumbnail to get a brief description of assembly. This figure will sit fine on a 3/4 inch seat but is a little large as I wanted his features to really show.
|
Albert Leaning Anywhere This is a 2 part kit. The right arm is cast separately from the figure. He was sculpted to lean against a door or window looking out or in. He was inspired by my favorite physicist Albert and has been cast in incredible detail in 1:20 scale and 7/8ths.
|
||||||||||||||||||||||||||||||||
|
Cy Crumley version 2 ET&WNC This is a 4 part resin kit. Assembly is required. I recommend using 5 minute epoxy. The hat, and arms are separate castings. The feet require no cleaning. You may need to level the feet with low heat by gently bending them.
|
Guiness Driver Great Britain This is a 2 piece kit that requires cleaning and assembly. I recommend that arm be heated after assembly and adjusted to the proper height of the object you wish it to rest on.
|
Napii OR&L This figure is dressed in a style familiar to workers on the OR&L during the mid 1900.
|
||||||||||||||||||||||||||||||||
| More G Scale Figures >> 1 > 2 > 3 | ||||||||||||||||||||||||||||||||||
|
These 1:20.32 Scale People are ideal for your Garden RailRoad or Dollhouse. I have other g scale people and accessories available in my catalogue I hope you have time to view them and your input is very much welcome. T H I S S I T E C R E A T E D by Richard Kapuaala © 2011 | ||||||||||||||||||||||||||||||||||