Accessories
Made In The U.S.A.
Cab 1 Assembly
|
View Cart Check Out |
Update 5 digit Zipcode
Old Broom
1:13.7
Just the broom, not the figure. It stands about 3.875 inches tall. This 7-8ths scale broom would look good leaning against the wall.
| Unpainted Item | $4 |
|---|
| Materials | |
| Scale | 1:13.7 |
Cab 1 Assembled
1:20.32
This cab comes assembled with the windows and doors glued shut. The Roof is not glued and can be removed to facilitate installation on your 1:20.3 Narrow Gauge Bachmann 4-4-0 or 2-6-0. The assembled cab take 1 week to complete from the date of order and will ship on the following Friday of the week of completion.
| Unpainted Item | $60 |
|---|
| Materials | |
| Scale | 1:20.32 |
Cab 1 Custom Build
1:20.32
This is the custom built Wooden Cab 1. It features operating doors and sliding windows. The roof is fixed usin 2 00-90 hex head screws and washers. The glazing is not included
| Unpainted Item | $250 |
|---|
| Materials | |
| Scale | 1:20.32 |
Cab 1 kit
1:20.32
This is the first kit Ive developed. It is based on the cab for the engine Lanakila and will fit the Bachmann 1:20.3 4-4-0 with some minor modifications to the mounts for the original cab.It can also fit the Bachmann 1:20.3 2-6-0 Mogul.
| Unpainted Item | $45 |
|---|
| Materials | |
| Scale | 1:20.32 |
Fedora Type Hat
1:20.32
Made specifically for Andy, can be heated and modified to fit BF Dillingham
| Unpainted Item | $5 |
|---|
| Materials | |
| Scale | 1:20.32 |
Fedora Pork Pie Hat
1:20.32
Fits Dick and can be heated to fit Kamaka,Vincent, Kealoha and Andy
| Unpainted Item | $5 |
|---|
| Materials | |
| Scale | 1:20.32 |
Hobo Joe Hat
1:20.32
This hat was made specifically to fit Hobo Joe. It is beat up looking and has a brim that is pinned to the crown of the hat.
| Unpainted Item | $5 |
|---|
| Materials | |
| Scale | 1:20.32 |