1:13.7 Scale FiguresMade In The U.S.A.
Follow me on FaceBook Scalehumans
|More Figures >> 1 > 2 > 3|
Items 1 to 12 of 25
Update 5 digit Zipcode
Alfy with a hat
This is a single cast piece with a hat. You will need to cut the sprews from the feet and clean the hat. There are two ways to fit the hat snugly. Use a hair dryer or hot water to stretch the hat over the head, or you can take a razor and scrape off the skull where you want the hat to fit. I prefer no alterations to the figure or the hat at all, but it depends on your taste.
This is a single cast piece. There is no assembly required, but you will need to clean up the flashing and the sprews at the bottom of his feet.
Cy version II
This is a 2 part kit. The hat and the rest of him are separate castings which allows you to make him just a regular guy if you like. There isn`t much to assembling him, so I don`t provide any assembly instructions.
Albert version III
This is a 4 part kit. The arms, the torso and the bottom are all separate castings. Some cleaning and fitting is required. For assembly instructions, please click on the image above.
Albert version II
This is a 2 part kit. The right arm is cast separate from the body. He leans comfortably on a window frame or a door frame or even a post.
Pippin version III
This is a five part kit. The arms, legs and torso are all separate castings. The seat height is best at 1.29 inches. The bottom is cast flat. To view the assembly instructions, click on the image above.
Pippin Version II
This is a 5 part kit. The hat, the torso, the arms and the bottom are all separate castings. While I trim the sprews away, there is still some triming and adjusting to get good fits on the joints. To view the assembly instructions click on the image above.
SE Cy Crumley
This is a 4 part kit. The hat, and the arms are cast separately. The feed require no cleaning but may need to be heated at low temperature and bent slightly to stand on a level surface. The arms need to be fitted and epoxied. The hat needs cleaning and painting.
This is a 4 piece kit, so assembly is required. The head, the body and the forearms are all separate casts.
Man in Tights
This is a 5 piece kit of a man in tights. He can be painted to match the colors and logo of just about anything. There is a small indentation where its possible to drill out with an 1/8 inch bit to mount the figure.
This is a 4 part resin kit. The figure sets best on a 1.29 inch high seat. He is also available in most scales, just contact me if you desire.
This is a 3 piece kit. Assembly is required. There is no hat for this figure at this time, but I am working on it so check back in. The hoe is not available and does not come with the figure.
More Figures >> 1
PLEASE NOTE These figures are in low demand so your order may not ship by Friday. I try to keep at least 2 of each in stock at any given time.
I try to stay as true to scale as my skills allow me. Some of you may notice a huge descrepency in sizes between Rob Bennet figures and Carlo Spiro figures. Make sure you review the dimensions provided in the grey tables beneath each figure before purchasing.
In the future I might add some caricature figures that are larger, but for now, I'm trying to go for as real a look as my skills will allow to.T H I S S I T E C R E A T E D by Richard Kapuaala © 2011