1 to 12 of 74 available figures in 6 scales.

Sorry, I'm taking a short break

Sculpted and Made In The U.S.A.
Follow me on FaceBook Scalehumans


I'll be open again October 16th. Till then, here is a lst of some of my figures.
ENJOY
I've been offering figures since 2006 and haven't taken a real break since. Usually I shut down for a week or two to clean up and tune equipment. This time I'm going to take off and do some fun stuff like working on some projects I've been putting off. I plan on spending at least 3 weeks relaxing and hopefully only a week or two cleaning up and tunning. Please come back and order after October 16th.






John

Anywhere
This is a one piece casting. You will need to remove the sprews from the feet and clean up any flashing left over.
Unpainted Figure $11
Height3.5 inches
Scale1:20.32
ReleasedJul/24/2014



Alfy with a hat

Great Britain
This is a single cast piece with a hat. You will need to cut the sprews from the feet and clean the hat. There are two ways to fit the hat snugly. Use a hair dryer or hot water to stretch the hat over the head, or you can take a razor and scrape off the skull where you want the hat to fit. I prefer no alterations to the figure or the hat at all, but it depends on your taste.
Unpainted Figure $16
Height3.4 inches
Scale1:20.32
ReleasedJul/24/2014



Alfy

Great Britain
This is a single cast piece. There is no assembly required, but you will need to clean up the flashing and the sprews at the bottom of his feet.
Unpainted Figure $11
Height3.3125 inches
Scale1:20.32
ReleasedJul/24/2014



Nude Lisa

Anywhere
This is a one piece casting. No assembly required, just paint and add your own clothing, or not.
Unpainted Figure $10
Height3.11 inches
Scale1:20.32
ReleasedSept/17/2013



Fred

OR&L
This is a single casting. No assembly is needed.
Unpainted Figure $11
Height3.5 inches
Scale1:20.32
ReleasedJun/01/2013



Fred With Hat

OR&L
This figure is cast in two parts. A body and a hat. The head is shaped specifically for the hat.
Unpainted Figure $15
Height3.5 inches
Scale1:20.32
ReleasedJun/01/2013



Plump Belgian

OR&L
This is a 7 part kit. The kit includes 1 hat, 1 torso, 1 rt hand, 1 rt arm, 1 lft arm with hand, 1 lft leg, 1 rt leg. While the kit does not include a cane the sprew for the rt hand can be used as a cane if you so desire. Click on the image above for assembly instructions. The hat is not necessary.
Unpainted Figure $35
Height2.7 inches
Scale1:20.32
ReleasedJun/01/2013



MzM No Accessories

Anywhere
This is the same kit as MzM but without the hat and the purse. Note that the assembly instructions are the same for both kits so click on MzM`s picture with the accessories for assembly instruction.
Unpainted Figure $30
Height2.7 inches
Scale1:20.32
ReleasedMar/28/2013



MzM Kit

Anywhere
This is an 11 part kit. There is 1 hat, 1 purse, 1 head, 1 torso, 1 skirt, 2 arms, 2 hands, 2 legs. This kit requires a lot of assembly, but the results are very nice. Please click on the image above and print out the assembly instructions if you intend to purchase this figure.
Unpainted Figure $40
Height2.7 inches
Scale1:20.32
ReleasedMar/28/2013



Clyde

Anywhere
This is a 7 part kit consisting of 1 hat, 1 head with torso, 1 pair of hands molded together, 2 arms, 2 legs and feet. Much assembly is required so please click on the image above and review the assembly instruction prior to assembly. If you are ordering this figure please print this page out because the instructions are not included.
Unpainted Figure $35
Height2.879 inches
Scale1:20.32
ReleasedMar/28/2013



The Brit

Anywhere
This is a 4 part kit consisting of 2 hats, the main body and a hand with the cane attached. Very little assembly is required. The hats are not optional and without them the figure has a big sprew on its head. Click on the image to see instructions for assembly.
Unpainted Figure $30
Height3.65 inches
Scale1:20.32
ReleasedMar/28/2013



Pippin Sitting

ET&WNC
SORRY ONE LEFT and this will be dicontinued.
This is a 5 part kit. The legs, torso and arms are separate castings. Please click on the thumbnail image above to view the steps for assembly. The figure will sit comfortably on a 3/4 inch seat. He leans slightly to his left as if trying to look out a window. The left arm could very easily be adjusted to lean on a window sill.
Unpainted Figure $50
Height2.85 inches
Scale1:20.32
ReleasedJan/24/2013


These 1:20.32 Scale People are ideal for your Garden RailRoad or Dollhouse. I have other g scale people and accessories available in my catalogue I hope you have time to view them and your input is very much welcome.

T H I S   S I T E   C R E A T E D   by Richard Kapuaala © 2011